Finished The Center Cabin Covers

I finished and installed all the center cabin covers. They cover the fuel lines, pump and valve. Here are most of the parts on the workbench.

 

The big cover is supposed to be 15/16ths above the floor which is not all the way down flush so this is the simple jig I made to set the height. It's cut to 15/16ths tall with a notch cut out to fit over the angle and the top edge rounded to fit the curve of the cover. The width is a little short to allow the cover to nest inside and be snug for a solid drill base. Fast and easy and wouldn't change a thing as it turned out great. Now, on to the electric flaps!