Working on Tie Downs

Tie downs are the metal rings that hang down under the wings where you attach ropes or chains to hold the aircraft firmly on the ground when it's parked. Small airplanes are surprisingly light. An average completed RV weighs around 1000 lbs. That's not much when you consider they have a wing span of 25 ft. A strong gust of wind can tip over most small airplanes if they're not tied down. The two large rectangles of metal get bolted to the main wing spar and the rings are screwed into the bottom. You can see how it works on the plans in the upper right corner of the photo below. These can also be used as jack points for lifting the airplane.

The shiny rectangles of aluminum with the holes in them (bottom right in picture) are spacers that go behind the tie down brackets against the spar. I fabricated them from scratch and put lightening holes in them. Lightening holes are just a way to make things lighter without affecting the strength of the item. I like to tease the gullible that lightning (without the "e") holes let the lightning out if you're struck by it.